高电压瞬时电流小瞬时电流可靠性冲击试验仪（耐焊弧可靠性冲击试验仪）-（微机调整）

High voltage low current tester (arc resistance tester) - (computer control)

车辆标题：耐电弧试验机

Product name: electric arc resistance tester

的产品类别查询：NDH-A

Product model: NDH - A

做到标：GB/T 1411-2002《气体绝缘带文件耐高降低瞬时电流电孤蓄电池放电的应力测试》（等同于IEC  61621-1997）及ASTM D495等条件的条件设计方案研制的，并适合IEC 149、UL 746A等测试技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

基本实用条件及系统：

本检验机是都按照应运于交流电动机、电热器和挂式电热器等制造业的焊工用氟朔料、硅胶粘合剂胶和电电耐压层带漆等电电耐压层带文件的耐弧光焊接能力评选，主广泛用于粉末状电电耐压层带文件如：氟朔料、透明膜、硅胶粘合剂、白云母、陶瓷图片、的玻璃、电电耐压层带油、电电耐压层带漆、瓦楞纸等有机溶剂的耐弧光焊接能力测试软件；

本试验装置机由算机保持启动，能能提示特定实践模式及实践用时，实践截止后并包存特定实践动态数据，并可彩印.标淮检测报告书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为上分离式构造，上面为控制体系，上面为应力测试箱。

2 本服务采用了*新自动化掌控能力，实现抉择小程序（IEC或ASTM）可重新做出检验，并在我的电脑信息显示测试阶段和结论。

3 **性能指标良好的，抗不干扰实力强，测评表面粗糙更高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断精力误差值：需小于 ±10ms

2 调压器电容量：2kVA

3 額定试验台端电压：12.5kV

4 校正输出功率精度等级：±3%

5 直流电操纵高精准度：±10%  感应电流测定精确度：1.5%

6 电极片对岩样负担：（0.5±0.05）N

7 探针用料：钨棒

8 工业多远：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 运用生态温差：（23±2）℃

10 施用场景室内温度：（50±5）%

11 开关电源：220V±5%  50Hz  10A

12 检测    的办法：   国际标准/美标/10 mA 间隔/20 mA 联续/30 mA连继/40 mA连续式

13 实验设计系统下列：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 护肤品主要参数：

NDH-A    耐焊弧经过多次实验发现仪-微机调节

NDH-B    耐脉冲可靠性试验仪-接触屏调节

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！